TECHNICAL INFORMATION
Polyurethanes | Marine | Primers and Sealers | Adhesives | Toppings | Epoxies | Miscellaneous
Technical Datasheets
For every product, there is a Technical Datasheet
produced to outline the intended use of the product, giving some basic
information on the intended use, and how it should be applied. The
Technical Data section goes a bit further, and lists the detail of
application rate, recommended film thickness, recoat and cure times,
shelf life, practical safety precautions, and recommended clean-up
products.
Technical Datasheets are your first stop for hard information on a product, and applicators should be very familiar with them. You will find them listed below for each product.
SDS
The hazardous components of products are listed in a set
format in a form called a SAFETY DATA SHEET, or SDS for
short. The SDS also provides information regarding the recommended
procedure for safe transport, storage, spill cleanup and disposal.
We seek this information for all of our raw materials from all of our suppliers so that we
can ensure that we handle and use products in a safe way, and in turn
we make them freely available for our formulated products on request to all of our customers.
SDS's are also listed below for each product.
Please note that all links open in a new window.
A GUIDE TO THE LAYING, SANDING & POLYURETHANE COATING OF CORK
& TIMBER FLOORS
523KB WORD95 DOCUMENT
TECHNICAL NOTES
Beneficial information by category to explain common problems and how they can be minimised.
Effects of humidity on polyurethane curing time
Effects of temperature on curing time
Coating Concrete and Terrazzo